Filter
Top Products
32
Delayed sending
Your fax can send a document automatically at a preset time. This allows you to take advantage of lower late-night
long-distance rates offered by some telephone companies.
The fax can only register one preset sending operation at a time.
5 Use the numeric buttons to enter the number of times you want the fax to
redial, then press [Start/Copy] twice.
6 Use the numeric buttons to enter the time interval between redialling attempts, then press [Start/Copy].
7 Press [Stop].
The fax returns to standby mode.
1 Load the document face down into the document feeder (see p. 13).
2 Press [Function], then press [Send Options].
3 Use [ ] or [ ] to select <DELAYED TX>, then press [Start/Copy].
4 Enter the desired sending time using the numeric buttons, then press [Start/Copy].
• Set the time using the 24-hour clock system. Precede single digits with a zero.
Example: 3:00 p.m. = 15:00
• Press [Clear] if you need to re-enter the time.
5 Enter the receiving party’s fax number, then press [Start/Copy].
• The fax scans the document into memory.
• You can enter the receiving party’s fax number using the numeric buttons, one-touch speed dialling or coded speed dialling (see
p. 30).
• If you use the numeric buttons, press [Start/Copy] after entering the number to register it.
6 When the set time comes, the fax dials and sends the document.
You can change the desired sending time and the receiving party’s fax number after setting them.
2MIN.
SET TIME 15:00
Thalia.book Page 32 Tuesday, September 28, 2004 10:13 AM