Filter
Top Products
45
8
8
SOLUTIONS TO COMMON PROBLEMS
SOLUTIONS TO COMMON PROBLEMS
Clearing jams
Removing a jammed document from the machine
Follow this procedure to remove a jammed document.
1 Remove the printing paper and the multi-purpose tray.
2 Lift the operation panel gently until it locks into position.
3 Lift the green release levers (on both sides).
4 Remove the jammed document.
Pull out the document either forward or backward.
5 Put the release levers back into position.
6 Take out any slack in the film.
7 Close the operation panel gently until it clicks into place.
The LCD display may show <SET INK FILM> if the ink film has any slack. In that case, open the operation panel again and
follow steps 6 to 7 again.
Document
Release lever
Thalia.book Page 45 Tuesday, September 28, 2004 10:13 AM