Filter
Top Products
42
■ RX SETTINGS
■ PRINTER SETTINGS
Name Description Settings
ECM RX Enable/disable error correction during reception. ON/OFF
FAX/TEL AUTO SW Enable/disable FAX/TEL switchover. This feature answers calls, and if
no fax tone is detected, the fax rings to alert you of an incoming call.
–
RING START TIME Set the duration that the fax listens for a fax tone before starting to
ring.
1 to 30 seconds
F/T RING TIME Set the length of time the fax will ring to alert you of an incoming
call.
10 to 60seconds
DEFAULT ACTION Select the action taken after the <F/T RING TIME> expires. DISCONNECT/RECEIVE
INCOMING RING Set the fax to ring when it receives a call. ON/OFF
RING COUNT Set the number of incoming rings before the fax answers. 1 to 99 times*
MAN/AUTO SWITCH Determine if the fax switches to document receive mode after the fax
rings for a specified time when the fax is in the manual receive mode.
ON/OFF
RING TIME Set the amount of time the fax will ring before switching to
document receive mode.
1 to 99 seconds*
EASY RX Enable/disable automatic fax reception after you pick up the handset
of the extension phone.
When <ON>, the fax begins receiving the document automatically.
When <OFF>, you have to press [Start/Copy] to receive the
document.
ON/OFF
* Differs depending on the country.
Name Description Settings
RX REDUCTION Enable/disable reduction for received documents. ON/OFF
PAPER SIZE Select the size of the loaded fax paper. A4/LGL/LTR
Thalia.book Page 42 Tuesday, September 28, 2004 10:13 AM