Filter
Top Products
41
7
SETTINGS AND ACTIVITY REPORTS
■ REPORT SETTINGS
■ TX SETTINGS
VOLUME CONTROL Set the volume of the fax sounds. –
KEYPAD VOLUME Set the volume of the keypad. 0 (off)/1/2/3
ALARM VOLUME Set the volume of the error alarm sound. 0 (off)/1/2/3
LINE MONITOR VOL Set the volume of the line monitor (sound during dialling). 0 (off)/1/2/3
RX CALL LEVEL Set the ring tone. STANDARD/HIGH
TEL LINE TYPE Set the dialling method the fax uses to match the type of phone line
you have.
TOUCH TONE/
ROTARY PULSE
R-KEY SETTING Set the type of connection for your fax. PSTN/PBX
PSTN Your fax is connected to an outside line. –
PBX Set the access line type for the <PBX>. If you select <PREFIX>, you
can enter an outside line number of up to 19 digits.
PREFIX/HOOKING
Name Description Settings
ACTIVITY REPORT Set the function of the activity management report. –
TX/RX SEPARATE Divide the activity management report into sending and receiving
transactions.
ON/OFF
Name Description Settings
ECM TX Enable/disable error correction during transmission. ON/OFF
MID PAUSE SET Set the length of the pause you insert into a dialling sequence. 1 to 15 seconds*
AUTO REDIAL Determine whether the fax will redial a number if it fails to get a
response on the first attempt.
ON/OFF
REDIAL TIMES Set the number of retries. 1 to 10 times*
REDIAL INTERVAL Set the period of time between redialling attempts. 2 to 60 minutes*
* Differs depending on the country.
Name Description Settings
07.fm Page 41 Tuesday, September 28, 2004 10:58 AM