Filter
Top Products
Setting and Using the System Administrator’s ID and Password
9-3
Restricting the Use of the Machine
9
3
Enter the current System Administrator’s password using the numeric keys ➞ press [OK] three times.
The password you entered is displayed with asteriscs.
The current password is displayed.
4
Open One-Touch Speed Dial panel.
5
Press [Clear] to cancel or change the System Administrator’s ID.
If you are canceling the System Administrator’s ID, press [OK] ➞ Proceed to step 7.
NOTE
When you cancel the System Administrator’s ID, the system password is also canceled.
6
Enter a new System Administrator’s ID and password of up to seven digits (from 1 to 9999999) using the
numeric keys ➞ press [OK].
For details about entering the System Administrator’s ID and password, refer to steps 5 to 7 of “Setting the
System Administrator’s ID and Password,” on p. 9-2.
The new password is displayed as you enter it.
7
Press [Stop/Reset] to return to standby mode.
SYS. ADMIN. ID
1234567
➞
SYSTEM SETTINGS
PASSWORD
SYS. ADMIN. INFO
2.SYSTEM PASSWORD
SYSTEM PASSWORD
7654321
SYSTEM SETTINGS
2.DEPT.ID MANAGEMNT
➞