Filter
Top Products
Loading Paper
4-3
Paper Handling
4
Loading Paper
This section describes how to load paper in the cassette and the multi-purpose feeder.
CAUTION
• When loading paper, take care not to cut your hands on the edges of the paper.
• Be sure to completely remove the paper cassette from the machine and place on a flat surface before
performing the following steps. Failure to do so, may cause the machine tip over, and result in
personal injury.
NOTE
•
The paper in the multi-purpose feeder is fed prior to the paper in the cassette.
•
The cassette holds up to approx. 250 sheets (FAX-L380S)/500 sheets (FAX-L390) of 64 g/m
2
paper or approx. 20
envelopes*.
*Only for the FAX-L380S model.
.
Loading Paper in the Cassette
1
Pull out the cassette completely.
2
Pinch and slide the length slide guide to fit the size of the paper stack you want to load.
For the FAX-L390 model, attach the stopper of the paper size rear guide for the desired paper size by inserting
the tabs into the matching slots on the paper cassette.
IMPORTANT
•
If the slide guides (FAX-L380S) are not adjusted correctly for the size of the paper, the quality of your printouts
may be adversely affected.
•
For the FAX-L390 model, be sure to properly attach the stopper of the paper size rear guide for the correct paper
size.
FAX-L380S FAX-L390