Filter
Top Products
47Faxing
Receiving Faxes
Flow of Receiving Faxes
The operation flow of receiving faxes is as follows:
Step 1
Select a receive mode.
See “Selecting the Receive Mode” on page 47.
Step 2
Load A4, Letter, or Legal-sized paper.
See “Loading Paper” on page 14.
Step 3
Confirm the paper settings and adjust them as needed.
See “Changing the Print Settings” on page 52.
Selecting the Receive Mode
Select the receive mode according to your needs.
z When you have a dedicated telephone line for fax use only:
Select FAX ONLY MODE.
z When you are using a single telephone line for faxes and voice calls:
If you receive mainly voice calls and sometimes faxes, select TEL PRIORITY MODE.
If you receive mainly faxes and sometimes voice calls, select FAX PRIORITY MODE.
z When you subscribe to a ring pattern detection service provided by your telephone company.
(Not available depending on the country or region of purchase.):
Select DRPD or NETWORK SWITCH.
Important
z The machine cannot receive faxes when the power is turned off. Press the ON/OFF button to
turn the power on.
z To cancel receiving, press the Stop/Reset button and follow any instructions on the LCD.
Note
If you do not have a dedicated phone line for fax use only, you need to connect a telephone or an
answering machine to the External device jack of this machine.