Filter
Top Products
Advanced Guide
Troubleshooting
Contents
> Loading Paper / Originals >
Loading Originals
> Originals You Can Load
Originals You Can Load
The originals you can load on the Platen Glass or in the ADF for copying, scanning, or faxing are as
follows:
Platen Glass
ADF
Types of
originals
Photos
Texts (documents, books,
magazines, etc.)
Documents that are not
suitable for the ADF
Multipage plain documents of the same size,
thickness, and weight
Size (W x L)
Max. 8.5 x 11.7 inches / 216 x
297 mm
Max. 8.5 x 14.0 inches / 216 x 356 mm
Min. 5.8 x 5.8 inches / 148 x 148 mm
Only A4 or Letter-sized documents for 2-on-1 copy
and 4-on-1 copy
Quantity
1 sheet A4 or Letter size: Max. 30 sheets (20 lb / 75 gsm
paper), up to 0.16 inches / 4 mm in height
Legal size: Max. 5 sheets (20 lb / 75 gsm paper),
up to 0.04 inches / 1 mm in height
Other sizes: 1 sheet
Thickness
Max. 0.39 inches / 10 mm
0.002 to 0.005 inches / 0.06 to 0.13 mm
Weight
-
13 to 24 lb / 50 to 90 gsm
Note
Make sure any glue, ink, correction fluid, or the like on the document is completely dry before
loading it on the Platen Glass or in the ADF.
However, do not load glued documents in the ADF even if the glue is dry, as this may cause paper
j
ams.
Remove all staples, paper clips, and the like before feeding the document.
Load Legal-sized documents in the ADF.
Do not load the following types of documents in the ADF. They will jam.
- Wrinkled or creased paper
- Curled paper
- Torn paper
- Paper with holes
- Glued paper
- Carbon paper or carbon-backed paper
- Surface treated paper
- Onion skin or thin paper
- Photo or thick paper
Page top
Page 100 of 817 pagesOriginals You Can Load