Filter
Top Products
center.
In other cases:
Turn off the machine, and unplug the power cord of the
machine from the power supply.
Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.
Load paper
Load paper and press [OK]
Reload the paper correctly and press the
OK
button.
Note
When sending faxes before printing out received data,
press the
Stop
button to resolve the error. After you
press the
Stop
button to resolve the error, ensure to
press the
FAX
button in order to print out data remained
in memory.
Document in ADF
Press [OK]
The document is jammed in the ADF. Remove the document
page jammed in the ADF, then press the
OK
button. Operate
again after resolving the error.
Document Jams in the ADF
Failed to scan document
Press [OK]
No document in the ADF.
Press the
OK
button to resolve the error, then operate again
after loading documents.
Close the feeder cover
[OK] ->Eject the document
Documents remain in the ADF.
Press the
OK
button to eject documents and press the
Stop
button to stop ejecting.
To continue scanning, operate on the application. The
scanning from the ADF may not be supported depending on
your application software. For details, refer to the instruction
manual of your application.
Document too long
Press [OK]
The document is too long or is jammed in the ADF.
Remove the document page jammed in the ADF, then press
the
OK
button. After resolving the error, make sure that the
document you are loading meets the machine's
requirements before redoing the operation.
Document Jams in the ADF
Open the paper output tray
[OK] ->Continue printing
Open the Paper Output Tray, then
OK
button.
Cover is open
You opened the Scanning Unit (Cover) during an operation.
Return the Scanning Unit (Cover) to its original position.
Paper jammed
Clear paper jam and press [OK]
If paper has jammed in the machine, clear the jam, reload
the paper in the machine correctly and then press the
OK
button.
Page top
Page 706 of 817 pagesAn Error Message Is Displayed on the LCD