Canon MX320 All in One Printer User Manual


 
Caller History List
This function may not be available depending on the country or region of purchase.
Printing the Caller history list
1.
Load paper.
Refer to
Loading Paper / Originals
.
2.
Press the
FAX
button, then press the
Menu
button.
The Fax settings screen is displayed.
3.
Use the button to select Print reports/lists, then press the
OK
button.
4.
Use the
button to select Caller history list, then press the
OK
button.
The Caller history list is printed.
TX Report
This machine can print a TX (transmission) report after sending a document, confirming whether
the transmission has been completed successfully. At the time of purchase, TX reports are set to
be printed only when a transmission error occurred. You can set the machine to print a report each
time it sends a document, or disable printing of the report.
Note
For details on the TX report settings, see
TX report
.
For the errors that occur when you send a fax, see Errors when you send a fax
.
Errors when you send a fax
If an error occurs when you send a fax, the error number is printed in the TX report (there are some
errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No.
Cause
A
ction
#001 Document is jammed in
the ADF.
The document is jammed in the ADF.
Remove the document page jammed in the
A
DF. When the error is cleared, redo the
operation. See
Document Jams in the ADF
.
#003
Document is too long.
You attempted to send a document longer than
15.75 inches / 400 mm.
You cannot send a document longer than
15.75 inches / 400 mm from the ADF.
#003 is also printed if it takes time to send a
page. Divide the document or set the image
quality (Fax resolution) to a lower setting, then
resend it.
#005
No answer.
The recipient's fax machine does not respond.
Contact the recipient and have the recipient
check that the telephone line is connected
correctly.
#012
Try again.
There is no paper in the recipient's fax
machine.
Contact the recipient and have the recipient
load paper.
#017
No tone is detected. The machine could not detect the dial tone.
Page 605 of 817 pagesSummary of Reports and Lists