Filter
Top Products
A
dvanced Guide
> Changing the Machine Settings > Changing the Machine Settings on the LCD
> Fax settings
Fax settings
This section describes the setting items in User settings, Transmission settings, and Reception
settings in the Fax settings menu.
User settings
Transmission settings
Reception settings
Note
Before changing the settings, you can confirm the current settings by printing the User's Data List.
For details, see
User's Data List
.
User settings
Auto print
Sets whether the machine automatically prints the received fax. When this setting is set to
OFF, received faxes are stored in memory.
Document Stored in Memory
Note
When this setting is set to OFF, the following reports are also not printed automatically.
A
ctivity repor
t
TX (Transmission) report
RX (Reception) report
MULTI TX (Transmission) report
Print when out of ink:
Sets whether to continue printing the received fax without storing it in memory when
the ink has run out. When this setting is set to ON, the machine prints the received fax
forcibly even if the ink has run out.
However, part or all of the fax may not be printed since the ink has run out.
Date/time setting
Sets the current date and time.
Specifying the Basic Settings for the Machine
Date display format
Sets the format of dates displayed on the LCD and printed on sent faxes.
Specifying the Basic Settings for the Machine
Three date formats are available; YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.
Summer time setting
Enables/disables the summer time setting. If you select ON, you can select additional sub-
settings. This setting may not be available depending on the country or region of purchase.
Start date/time
Sets the date and time that summer time starts.
Set month: Specify the month.
Set week: Specify the week.
Set day of week: Specify the day of the week.
Set shift time: Specify the hour (24-hour clock).
End date/time
Sets the date and time that summer time ends.
Set month: Specify the month.
Set week: Specify the week.
Set day of week: Specify the day of the week.
Set shift time: Specify the hour (24-hour clock).
Unit TEL no. registr.
Page 683 of 817 pagesFax settings