Filter
Top Products
Projector WUX10 MarkII User Commands
- 15 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
ASCOMBO_*
Defines auto setup combination
Format
ASCOMBO_AF=<Auto set combination parameter:ID>
ASCOMBO_AVK=<Auto set combination parameter:ID>
ASCOMBO_AINP=<Auto set combination parameter:ID>
ASCOMBO_ASC=<Auto set combination parameter:ID>
GET□ASCOMBO_AF / ?ASCOMBO_AF
GET□ASCOMBO_AVK / ?ASCOMBO_AVK
GET□ASCOMBO_AINP / ?ASCOMBO_AINP
GET□ASCOMBO_ASC / ?ASCOMBO_ASC
<Auto set combination parameter:ID>
ON Combine
OFF Do not combine
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if automatic setup combination was set properly.
For '
GET ASCOMBO_*' or '? ASCOMBO_*', current auto setup sequence combination is returned as
'
g:ASCOMBO_*=ON' or
'
g:ASCOMBO_*=OFF'
For details on other responses, refer to the "Error List".
Description
(1) This sets whether to combine a sequence in the auto setup.
(2) This command functions in the same way as when "System settings" - "Auto setup" are
selected on the menu.
(3) Even if it has been set using this command, AUTOSETEXE may not be executed depending on
other status of the projector (screen aspect, etc.).
(4) Also refer to the AUTOSETEXE command.
(5) The current auto setup combination can be obtained using the GET command.
Example
Setting
> ASCOMBO_AF=ON Auto focusing is executed during auto setup execution.
< i:OK
Reference
> GET ASCOMBO_AVK or ?ASCOMBO_AVK
Auto focus execution setting in current auto setup is obtained.
< g:ASCOMBO_AVK=ON
* Commands are indicated by ">", and responses are indicated by "<".