Filter
Top Products
Projector WUX10 MarkII User Commands
- 39 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
HUE
Hue setting
Format
HUE=<Hue setting value:Number>
GET□HUE / ?△HUE
Setting values for <Hue setting value:Number> are -20 to 20.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
O O
X O X X X X
O
X
X
Response
"i:OK" is returned if the parameter was set properly.
For '
GET HUE' or '?HUE', current hue setting is returned as
'
g:HUE=<Hue setting value:Number>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen hue.
(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -
"Hue setting" are selected on the menu.
(3) If the input is neither "COMP" nor "VIDEO", 'e:200X INVALID_SOURCE(***)' is returned as
an error response.
(4) When input is "VIDEO" and signals are not input, 'e:2010 NO_SIGNAL' is returned.
(5) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(6) This sets the currently selected input signal and image mode.
(7) The GET command can be used to retrieve the current hue. ("
GET HUE")
Example
Setting
>HUE=8 This sets the hue to +8.
<i:OK
Reference
>GET HUE or ?HUE This retrieves the hue.
<g:HUE=1
* Commands are indicated by ">", and responses are indicated by "<".