Filter
Top Products
Projector WUX10 MarkII User Commands
- 23 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
BRI
Brightness setting
Format
BRI=<Brightness setting:Number>
GET□BRI / ?△BRI
Setting values for <Brightness setting:Number> are -20 to 20.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET BRI' or '?BRI', current brightness is returned as
'
g:BRI=<Brightness setting:Number>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen brightness.
(2) This command functions in the same way as when "Image adjustments" - "Brightness" are
selected on the menu.
(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) This sets the currently selected input signal and image mode.
(5) The current brightness can be acquired using the applicable GET command. ("
GET BRI")
Example
Setting
> BRI=-10 This sets the brightness to -10.
< i:OK
Reference
> GET BRI or ?BRI This retrieves the brightness.
< g:BRI=-10
* Commands are indicated by ">", and responses are indicated by "<".