Filter
Top Products
Projector WUX10 MarkII User Commands
- 81 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
7. Error List
Item Code TYPE Error character strings Error Remedy
1 0001 e
BAD_SEQUENCE Communication sequence error
Wait until a response is received
before sending the next command.
2 0002 e
INVALID_COMMAND Invalid (undefined) command. Send a valid command.
3 0004 e
INVALID_FORMAT Invalid command format.
Send the command in the valid
format.
4 0005 e
NOT_POWER_SUPPLIED The projector's power is off.
Turn on the power using the
POWER ON command.
5 - i
BUSY (POWER)
The projector is switching power
modes.
Wait until the power mode is ON,
OFF or PMM.
6 000A e
INVALID_PARAMETER
The parameter (type) is invalid
(undefined). Includes cases when
the number of parameters is
incorrect.
Use the correct parameters.
7 000B e
JOB_TIMEOUT
Internal processing in the projector
has timed out.
Resend the command.
i
BUSY (FOCUS) The focus lens is being driven.
Wait until the projector has finished
driving the focus lens.
i
BUSY (ZOOM) The zoom lens is being driven.
Wait until the projector has finished
driving the zoom lens.
i
BUSY (LOGO_CAPTURE)
User image registration is in
progress.
Wait until user image registration is
complete.
i
BUSY (IMAGE)
Image mode switching is in
progress.
Wait until the projector has switched
the image mode.
i
BUSY (NOW_SETTING)
Signal setting (detection) in
progress.
Wait until the processing is
completed.
9 -
i
BUSY
Internal processing in the projector
is in progress.
Wait until the current processing is
complete.
1006 e
NOW_BLANK
Cannot execute command since
blanking operation is in progress.
Resend the command after
canceling the blanking operation.
1009 e
NOW_FREEZE
Cannot execute command since
freeze operation is in progress.
Resend the command after
canceling the freeze operation.
100A e
NOW_D.ZOOM
Cannot execute command since
D. zooming is in progress.
Resend the command after
canceling D. zooming.
10
100B e
NOW_SPECIAL_MENU
Cannot execute command in
current menu mode.
Resend the command after exiting
the current menu mode.