Filter
Top Products
Projector WUX10 MarkII User Commands
- 71 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
SHARP
Sharpness setting
Format
SHARP=<Sharpness setting:Number>
GET□SHARP / ?△SHARP
Setting values for <Sharpness setting:Number> are -10 to 10.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET SHARP' or '?SHARP', current sharpness setting is returned as
'
g:SHARP=<Sharpness setting:Number>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen sharpness.
(2) This command functions in the same way as when "Image adjustment" - "Sharpness setting"
are selected on the menu.
(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) This sets the currently selected input signal and image mode.
(5) The current sharpness can be acquired using the applicable GET command. ("
GET SHARP")
Example
Setting
> SHARP=3 This sets the sharpness to 3.
< i:OK
Reference
> GET SHARP or ?SHARP This retrieves the sharpness.
< g:SHARP=3
* Commands are indicated by ">", and responses are indicated by "<".