Filter
Top Products
Projector WUX10 MarkII User Commands
- 27 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
DGAMMA
Dynamic gamma
Format
DGAMMA=<Dynamic gamma setting parameter:ID>
GET□DGAMMA / ?△DGAMMA
<Dynamic gamma setting parameter:ID>
OFF Off
WEAK Weak
STRONG Strong
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET DGAMMA' or '?DGAMMA', current dynamic gamma setting is returned as
'g:DGAMMA=<Dynamic gamma setting parameter:ID>'
For details on other responses, refer to the "Error List".
Description
(1) The command is used to set the dynamic gamma function.
(2) This command functions in the same way as when "Image adjustment" - "Advanced
adjustment" - "Dynamic gamma" are selected on the menu.
(3) This sets the currently selected input signal and image mode.
(4) The current dynamic gamma function status can be acquired using the applicable GET
command. ("
GET DGAMMA")
Example
Setting
> DGAMMA=WEAK This sets the dynamic gamma function to WEAK.
< i:OK
Reference
> GET DGAMMA or ?DGAMMA This retrieves the dynamic gamma function state.
< g:DGAMMA=WEAK
* Commands are indicated by ">", and responses are indicated by "<".