Filter
Top Products
Projector WUX10 MarkII User Commands
- 55 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
PMM
Power management
Format
PMM=<Power management setting parameters:ID>
GET□PMM / ?△PMM
<Power management setting parameters:ID>
OFF OFF
STANDBY Standby mode
EXIT Exit mode
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET PMM' or '?PMM', current power management setting is returned as
'g:PMM=<Power management setting parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the power management mode.
(2) This command functions in the same way as when "System setting" - "Power management
mode" are selected on the menu.
(3) Power management cannot be set to OFF if ON has been selected as the direct power-on
setting (DPON=ON).
("
e:1005 DIRECT_POWER_ON" is returned)
(4) The current power management mode can be acquired using the applicable GET command.
("
GET PMM")
Example
Setting
> PMM=STANDBY This sets the power management to "standby".
< i:OK
Reference
> GET PMM or ?PMM This retrieves the power management mode.
< g:PMM=EXIT
* Commands are indicated by ">", and responses are indicated by "<".