Filter
Top Products
Projector WUX10 MarkII User Commands
- 22 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
BLANKCOLOR
Screen when BLANK setting
Format
BLANKCOLOR=<Screen when BLANK setting parameter:ID>
GET□BLANKCOLOR / ?△BLANKCOLOR
<Screen when BLANK setting parameter:ID>
BLACK Black screen
BLUE Blue screen
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET BLANKCOLOR' or '?BLANKCOLOR', current screen when BLANK setting is returned as
'g:BLANKCOLOR=<BLANK display screen setting parameter:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to set the screen when BLANK.
(2) This command functions in the same way as when "Display settings" - "User screen setting" -
"Screen when blank" are selected on the menu.
(3) The current screen when BLANK setting can be obtained using the GET command. ("
GET
BLANKCOLOR
")
Example
Setting
> BLANKCOLOR=BLACK Set to "Black screen" when screen is BLANK.
< Ok
Reference
> GET BLANKCOLOR or ?BLANKCOLOR Screen when BLANK setting is obtained.
< g:BLANKCOLOR=BLACK
* Commands are indicated by ">", and responses are indicated by "<".