Filter
Top Products
Projector WUX10 MarkII User Commands
- 44 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
KEYLOCK
Keylock setting
Format
KEYLOCK=<Key lock setting parameters:ID>
GET□KEYLOCK / ?△KEYLOCK
<Key lock setting parameters:ID>
OFF No locking (OFF)
MAIN Main key lock
RC Remote control key lock
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET KEYLOCK' or '?KEYLOCK', current keylocking setting is returned as
'g:KEYLOCK=<Key lock setting parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to lock the keys so as to restrict the operations performed using the
remote control or main unit.
(2) This command functions in the same way as when "System setting" - "Key lock" are selected
on the menu.
(3) This command will not affect the emulation function (remote control or main unit commands)
even if the main unit or remote control keys are locked.
(4) The current key lock setting can be acquired using the applicable GET command. ("
GET
KEYLOCK
")
Example
Setting
> KEYLOCK=RC This locks the remote control keys.
< i:OK
Reference
> GET KEYLOCK or ?KEYLOCK This retrieves the key lock state.
< g:KEYLOCK=OFF
* Commands are indicated by ">", and responses are indicated by "<".