Filter
Top Products
Projector WUX10 MarkII User Commands
- 76 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
VKS
Vertical keystone setting
Format
VKS=<Vertical keystone distortion value:Number>
GET□VKS / ?△VKS
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET VKS' or '?VKS', current vertical keystone setting value is returned as
'
g:VKS=<Vertical keystone distortion value:Number>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the vertical keystones.
(2) This command is identical to pressing the “KEYSTONE” button on the remote control.
(3) The settable keystone range varies depending on the input signal, screen size, number of
horizontal and vertical dots, and other factors.
If keystone values are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) The GET command can be used to obtain the current vertical/horizontal keystone value. ("
GET
VKS
")
Example
Setting
> VKS=-23 This sets the vertical keystone to –23.
< i:OK
Reference
> GET VKS or ?VKS This retrieves the vertical keystone.
< g:VKS=-23
* Commands are indicated by ">", and responses are indicated by "<".