Filter
Top Products
Projector WUX10 MarkII User Commands
- 65 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
RGBOFFSET
RGB offset adjustment
Format
RGBOFFSET=<R offset setting:Number>
▽
<G offset setting:Number>
▽
<B offset setting:Number>
GET□RGBOFFSET / ?△RGBOFFSET
Setting values for <R/G/B offset setting:Number> are -60 to 60.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET RGBOFFSET' or '?RGBOFFSET', current RGB offset adjustment values are returned as
'
g:RGBOFFSET=<R offset setting:Number>,<G offset setting:Number>,<B offset setting:Number>
'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to adjust the offset of the R, G and B colors.
(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -
"Offset adjustment" are selected on the menu.
(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) This sets the currently selected input signal and image mode.
(5) The current RGB offset values can be obtained using the GET command. ("
GET RGBOFFSET")
Example
Setting
> RGBOFFSET=10, 11, 12 The R offset is set to 10, G offset to 11 and B offset to 12.
< i:OK
Reference
> GET RGBOFFSET or ?RGBOFFSET The RGB offset values are obtained.
< g:RGBOFFSET=-10, 0, 19
* Commands are indicated by ">", and responses are indicated by "<".