Filter
Top Products
Projector WUX10 MarkII User Commands
- 29 -
Revision Histor
y
/ Date Chan
g
es Revised b
y
A
pp
roved b
y
DPON
Direct power-on setting
Format
DPON=<Direct power-on setting parameter:ID>
GET□DPON / ?△DPON
<Direct power-on setting parameter:ID>
ON This sets direct power-on to ON.
OFF This sets direct power-on to OFF.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET DPON' or '?DPON', current direct power-on setting is returned as
'g:DPON=<Direct power-on setting parameter:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to set direct power-on function to ON or OFF.
(2) This command functions in the same way as when "System setting" - "Direct power-on" are
selected on the menu.
(3) Direct power-on cannot be set to ON when "OFF" has been selected as the power management
setting (
PMM=OFF).
("e:1004 POWER_MANAGEMENT_OFF" is returned.)
(4) The current direct power-on setting can be obtained using the GET command. ("
GET DPON")
Example
Setting
> DPON=ON Direct power-on is set to ON.
< i:OK
Reference
> GET DPON on ?DPON The current direct power-on setting is obtained.
< g:DPON=ON
* Commands are indicated by ">", and responses are indicated by "<".