Filter
Top Products
11
AC Adaptor
Note the following important precautions when using an AC adaptor to power your Label
Printer.
• Use only a genuine CASIO AD-A95100 AC adaptor with the same voltage rating as the
household current in your area. Using a wrong adaptor can damage your Label Printer.
• Be sure to switch the Label Printer off before you connect the adaptor. Do not switch
power on until the adaptor is connected to the Label Printer and plugged into an AC
outlet.
To connect the AC adaptor
Connect the AC adaptor to the Label Printer as
illustrated on the right. Plug the other end into a
standard household AC outlet.
Switching Power On and Off
Press ON to switch power on, and OFF to switch power off.
Important!
If you are using the Label Printer for the first time, you should use the procedure described
under “Resetting the Memory” to switch power on.
Resetting the Memory
You should reset the memory of the Label Printer before using it for the first time, after you
have not used it for a long time, or if nothing happens when you switch power on even after
you change the batteries.
Important!
Resetting Label Printer memory clears the memory of all input data.
To reset the memory
1. Make sure that Label Printer power is off.
2. While holding down the PRINT and ESC keys, press
ON to switch power on.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
A
SET
Yes No
ESC
INITIAL?