Filter
Top Products
66
RESET switch
Press with a thin,
pointed object.
Resetting
If you experience serious malfunction of the Label Printer or if operation fails completely,
try performing the following operation to reset the unit.
1. Switch power off.
2. Open the tape cartridge compartment cover and remove the tape cartridge.
3. Press the RESET switch inside the tape cartridge compartment to reset the Label Printer.
• Take care not to press the RESET switch too hard with a pointed object. Doing so can
cause malfunction.
• Never press the RESET switch except when the Label Printer fails to operate correctly.
• Data stored in memory is not cleared when you press the RESET switch.