Filter
Top Products
56
EN
•
THIS IS THE WRONG TYPE OF TAPE CARTRIDGE!
•
The tape compartment cover is not closed securely.
→
Close the cover securely. (page 17)
•
The data you are trying to print or recall is not compatible with the
type of tape cartridge loaded in the printer.
→
Turn off power and replace the tape cartridge. (pages 16, 17)
•
The tape cartridge was replaced while printer power was turned on.
→
Turn off power and replace the tape cartridge. (pages 16, 17)
•
TOO LONG
CANNOT PRINT
•
The label you are trying to print is longer than the printable length.
→
Shorten the label or reduce the number of copies. (pages 19, 31)
•
TOO MANY CHARACTERS! SOME WERE LOST
•
You attempted to create a phrase memory text based on an
expression that contains more than 49 characters.
→
Only the fi rst 49 characters of the expression will be used. Edit the
expression as required. (page 46)
•
TOO MANY CHARACTERS! SOME WERE NOT COPIED
•
You attempted to copy more than 49 characters.
→
Reduce the number of characters. (page 48)
•
TOO MANY LINES TO FRAME!
•
You are trying to print a label with more lines than allowed for frame
printing on the width of tape you are using.
→
Decrease the number of label lines or change to a wider tape.
•
TOO MANY LINES!
•
The label you are trying to print contains more than the allowable
number of lines for the tape width you are using.
→
Reduce the number of lines or change to a wider tape. (pages 28, 37, 57)
•
TOO SHORT TO CUT!
SET/ESC
The tape being printed is so short that unneeded part cannot be
trimmed or a cut cannot be performed between labels.
•
To print
→
Press SET. Use scissors or some other implement to cut the tape after
printing is complete. (page 21)
•
To print with auto tape cutting (excluding numbered label printing)
→
Increase the margins (from NARROW to MEDIUM or from MEDIUM to
WIDE). You can specify FULL CUT for the cut mode and WIDE for the
margin setting to make leading and trailing margins equal. (page 30)
•
To print with auto tape cutting (numbered label printing)
→
Use the print format settings to change the tape length setting to FIX.
(page 30)