Filter
Top Products
7
EN
Caution
Unstable Locations
Never place the product on an unstable surface, on a high
shelf, etc.
Doing so can cause the product to fall, creating the risk of
personal injury.
Loading and replacing batteries
The springs inside of the battery compartment have sharp
edges. Take care that you do not touch the springs with your
fi ngers when loading or replacing batteries. Doing so creates
the risk of personal injury.
High temperature precaution
The print head and the metal parts around it can become very
hot.
Do not touch them. Doing so creates the risk of burn injury.
Display Screen
•
Never push on the display screen’s LCD panel or subject it
to strong impact. Doing so can cause the LCD panel’s glass
to crack, creating the risk of personal injury.
•
Should the LCD panel ever crack or break, never touch the
liquid inside of the panel. LCD panel liquid can cause skin
irritation.
•
Should LCD panel liquid ever get inside your mouth,
immediately wash out your mouth with water and contact
your physician.
•
Should LCD panel liquid ever get into your eyes or onto
your skin, rinse with clear water for at least 15 minutes, and
then contact a physician.
Cutter Precautions
Do not insert your fi ngers into the print head or the cutter at
the tape outlet. Doing so creates the risk of fi nger cuts and
personal injury.
Precautions during Use
Observe the following precautions to ensure that the printer provides you with
the years of trouble-free operation for which it is designed.
•
Avoid using the printer in areas exposed to direct sunlight, and in areas
subjected to high humidity, electrostatic charge, sudden temperature
changes, and temperature extremes. Operating Temperature Range: 10°C
to 35°C (50°F to 95°F)
•
Battery capacity becomes lower at temperatures of 10°C (50°F) and colder.
This can cause the message LOW BATTERY! to appear sooner than
normal. If this happens, move the printer to a location that is within the
operating temperature range (10°C to 35°C (50°F to 95°F)).
•
Never subject the printer to strong impact or shock.
•
Never allow paper clips, pins, or other similar objects to get inside the
printer mechanism.
•
Do not pull on the tape with undue force or try to push it back into the
printer.
•
Unclear printing can indicate a dirty print head. If printing becomes unclear,
use the procedures on page 53 to clean the print head and rubber roller.
Conventions Used In This Manual
•
The conventions described below are used in this manual to describe how
to select display items and perform other operations.
Example: Use the arrow keys to select NEW and then press SET.
↓
Select NEW and then press SET.
Example: Use the and arrow keys to change the COPIES value (number
of copies).
↓
Specify the number of copies to be printed.