Filter
Top Products
Section 3
Operation
RPMX/CX50/CX60/CX67 User’s Manual 3-1
This section provides a general description of the projector’s main components. It
also provides details on the projector’s software menu system.
The modular design of the projector allows the user to access and service specific
components of the projector, such as the lamp, quickly and easily without having
to disassemble the entire projector.
Figure 3.1. The Projector (shown in lens horizontal configuration)
The PHM is the largest module of the projector. It contains all the main optical
components of the projector such as the short throw projection lens, color wheel,
DMD and lamp.
In the RPMX projector, the PHM is shipped in a 0 degree (lens horizontal)
configuration. With a quick changeover of mounting brackets, the module can be
flipped to a 90-degree (lens vertical) position for rear screen projection
applications using an optical fold mirror. (In CX50/CX60/CX67 products the
projector is already in the 90-degree position.)
Located on the top of the PHM is a small red switch that allows you to switch the
lamp power from 100W to 120W. It is recommended that you choose the 100W
setting when you are performing setup procedures for the first time.
3.1 Projector
Overview
Projection Head Module '
(PHM)