Filter
Top Products
Section 2: Source Setup
2-2 RPMX/CX50/CX60/CX67 User’s Manual
Connect Analog VGA signals to the 15-pin HD D-sub connector on the second
input interface. Figure 2.2.
Figure 2.2. Analog VGA Connector
The second input interface is dedicated to digital video input signals conforming
to the DVI (Digital Visual Interface) standard.
To connect an incoming digital video signal to the projector, connect the cable
running from the source to the DVI input connector - the DVI output adjacent to
the DVI input connector remains empty. If you want to loop the source through
to another display device, connect a cable from the DVI output connector (that
was empty) to a DVI input connector on the digital display. See Figure 2.3.
To loop the DVI signal through a series of display devices continue looping
connection in this manner – your last device will have an empty DVI output
connector. See Figure 2.4. All projectors will display the same as the first
projector, no matter what type of input signal is present for other projectors, even
internal test patterns.
NOTES: 1) When looping a DVI input signal, all projectors will display the same
data from that one source.
Figure 2.3. Connecting a Digital Video Input Signal
A
nalo
g
VGA Si
g
nals '
DVI Di
g
ital Video Si
g
nals '