Filter
Top Products
Section 3: Operation
3-6 RPMX/CX50/CX60/CX67 User’s Manual
Most of the controls for the projector are accessed from within the projector’s
menu system. The Main Menu is accessible by pressing the
Menu
key on the
remote keypad. This menu is accessible at any time during operation. From it you
can access various other “submenus” with related functions.
Figure 3.2. Accessing the Main Menu
To select a submenu, use the
ON
OFF
keys to highlight the desired option and
press
Enter
. Alternatively, press the # key for the item you want, once it’s
highlighted press
Enter
.
Once you have a submenu displayed, navigate in a similar manner – use the
ON
OFF
or # keys to highlight another option and press
Enter
to select. Items that
are locked out or do not pertain to the current action appear in yellow text and
cannot be selected.
NOTES: 1) If there is no signal present, the menus are inaccessible. 2) The Status
menu is read-only.
When finished with a submenu, do one of the following:
• Press
Exit
to return to the previous screen
• Press
Menu
twice or
Menu
then
Exit
to return to presentation level.
Adjusting Slidebars
The current value for a given option, such as size or vertical stretch, appears to
the left of its slidebar icon. This number may express a percentage or specific
units (such as pixels, degrees Kelvin, etc.), depending on the option. Press
or
to gradually adjust the setting up or down—both the number and the length
of the bar change accordingly (for continuous adjustment, hold down the desired
arrow key).
Navi
g
atin
g
the Menus '