Filter
Top Products
Section 3: Operation
3-24 RPMX/CX50/CX60/CX67 User’s Manual
Figure 3.33.
This is a read-only window accessible from the Main menu that lists system
information, such as projector model and serial number, projector ID, current
input source, resolution, frequencies and current software version.
Figure 3.34. Status Menu
You can select Auto Setup from the Main menu to enable the projector to
automatically set up an image by optimizing the following display options:
What an “Auto Setup” Does
OPTIMIZES: SETS TO DEFAULT:
Pixel Tracking Contrast & Brightness
Pixel Phase Auto Input Level (off)
Size Blanking
Vertical Stretch Detail (if video source)
Position Filter
Input Levels (if analog source) Luma Delay
Selecting Auto Setup can save you some time in setting up an image, and you
can also make further adjustments as desired. You must have an unlocked channel
present to use this option. When you select Auto Setup, a separate window
appears requesting confirmation to proceed. This allows you to cancel the
process before any changes are made to the display parameters.
NOTES: 1) Auto Setup is not available with video signals. 2) Additional manual
adjustments may still be required after Auto Setup.
3.5 System Status
3.6 Auto Setup