Filter
Top Products
Section 2
Source Setup
RPMX/CX50/CX60/CX67 User’s Manual 2-1
This section provides details on how to connect various external sources to the
projector. All connections are made to the main input panel of the Electronics
Module (EM).
It is recommended that you connect your sources before powering up the
projector.
The top input interface provides 5 BNC connectors for connecting to a variety of
sources such as VGA, SVGA, XGA, SXGA, Mac, PowerMac, DEC, Sun, SGI
and others. This projector supports multiple sync types with RGB signals: sync-
on-green, composite sync, and separate H & V syncs.
To properly connect RGB sources use the table and illustration below (Figure
2.1.).
5 BNC Connectors
RGB Source Outputs
Red Green Blue Hor/Comp Vert
sync-on-green
√
√
√
composite sync
√
√
√
√
separate horizontal and
vertical sync
√
√
√
√
√
NOTE: Connect the Sync BNC inputs first.
Figure 2.1. Connecting RGBHV sources
Introduction
2.1 Source
Connections
RGBHV (5 BNCs) '