Filter
Top Products
10-21
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02
Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
Configuring IEEE 802.1x Authentication
Note The proxyacl entry determines the type of allowed network access.
For more information, see the “Configuring Web Authentication” section on page 10-41.
Configuring IEEE 802.1x Authentication
These sections contain this configuration information:
• Default IEEE 802.1x Authentication Configuration, page 10-22
• IEEE 802.1x Authentication Configuration Guidelines, page 10-23
• Configuring IEEE 802.1x Authentication, page 10-25 (required)
• Configuring the Switch-to-RADIUS-Server Communication, page 10-26 (required)
• Configuring the Host Mode, page 10-28 (optional)
• Configuring Periodic Re-Authentication, page 10-29 (optional)
• Manually Re-Authenticating a Client Connected to a Port, page 10-29 (optional)
• Changing the Quiet Period, page 10-30 (optional)
• Changing the Switch-to-Client Retransmission Time, page 10-30 (optional)
• Setting the Switch-to-Client Frame-Retransmission Number, page 10-31 (optional)
• Setting the Re-Authentication Number, page 10-32 (optional)
• Configuring IEEE 802.1x Accounting, page 10-32 (optional)
• Configuring a Guest VLAN, page 10-33 (optional)
• Configuring a Restricted VLAN, page 10-34 (optional)
• Configuring the Inaccessible Authentication Bypass Feature, page 10-36 (optional)
• Configuring IEEE 802.1x Authentication with WoL, page 10-38 (optional)
• Configuring MAC Authentication Bypass, page 10-39 (optional)
• Configuring NAC Layer 2 IEEE 802.1x Validation, page 10-40 (optional)
• Configuring Web Authentication, page 10-41
• Disabling IEEE 802.1x Authentication on the Port, page 10-43 (optional)
• Resetting the IEEE 802.1x Authentication Configuration to the Default Values, page 10-44
(optional)