Filter
Top Products
NetXtreme II User Guide
January 2010
Broadcom Corporation
Page 174 Using Broadcom Advanced Control Suite 3 Document ENGSRVT52-CDUM100-R
SETTING ADAPTER PROPERTIES
Advanced and iSCSI Boot Configuration on the Configurations tab allow you to view and change the values of the
available properties of the selected adapter. The potentially available properties and their respective settings are described
below.
NOTES:
• You must have administrator privileges to change the values for a property.
• The list of available properties for your particular adapter may be different.
• Some properties may not be available for all Broadcom network adapters.
• If an adapter is included as a member of a team and you change any advanced property, then you must rebuild
the team to ensure that the team’s advanced properties are properly set.
To set adapter properties
1. Click the name of the adapter in the Device Management pane.
2. Click the Configurations tab. If the Configurations tab is not visible, then from the View menu, select Navigate, then
Device Management, and then Configurations.
3. From the Advanced or iSCSI Boot Configuration section, select the property you want to set. If the Advanced or iSCSI
Boot Configuration section is not available, then from the Context View tab on the right side of the window, select
Configurations and then select Advanced or iSCSI Boot Configuration.
4. To change the value of a property, select an item from the property’s list or type a new value, as appropriate (selection
options are different for different properties).
5. Click Apply to confirm the changes to all properties. Click Reset to return the properties to their original values. Click
Defaults to restore all settings to their default values.
NOTES:
• Clicking Reset after clicking Defaults, but before clicking Apply, will purge all values.
• Apply must be clicked to make changes go into effect.
• Any changes to existing settings will be lost upon clicking Defaults.