Filter
Top Products
User Guide NetXtreme II
January 2010
Broadcom Corporation
Document ENGSRVT52-CDUM100-R Using Broadcom Advanced Control Suite 3 Page 181
Local Initiator login failures. The number of login failures likely caused by the initiator.
Initiator Instance Statistics. The statistics in this area pertain to all sessions.
Session digest errors. The number of sessions with errors due to an invalid payload or header.
Session connection timeout error. The number of sessions that were terminated due to any of the many timeout errors.
Session format error. The number of sessions with errors due to inconsistent fields, reserved fields not 0, non-existent
LUN, etc.
Sessions failed. The number of failed sessions.
Custom
Custom statistics.
Total Offload iSCSI Connections. The total number of offloaded iSCSI connections.
Session Statistics
The statistics in this area only pertain to the named session.
Session Name. The name used for the session between the initiator and the target.
Session Id. The identifier used for the session between the initiator and the target.
Bytes sent. The number of bytes sent for the named session.
Bytes received. The number of bytes received for the named session.
PDU sent. The number of iSCSI PDUs sent for the named session.
PDU received. The number of iSCSI PDUs received for the named session.
Digest errors. The number of errors due to an invalid payload or header for the named session.
Connection Timeout errors. The number of connection timeout errors for the named session.
Format errors. The number of errors due to inconsistent fields, reserved fields not 0, non-existen LUN, etc. for the named
session.
IEEE 802.3 Statistics
Frames Rx with Alignment Error. A count of the frames that were not an integral number of octets in length and do not
pass the FCS check. This counter is incremented when the receive status is reported as Alignment Error.
Frames Tx with one Collision. A count of the frames that were involved in a single collision and were subsequently
transmitted successfully. This counter is incremented when the result of a transmission is reported as Transmit OK, and the
attempt value is 2.