Filter
Top Products
NetXtreme II User Guide
January 2010
Broadcom Corporation
Page 68 SNMP Document ENGSRVT52-CDUM100-R
BASP EXTENSIBLE-AGENT
The Broadcom NetXtreme II Gigabit Ethernet Controller Extended Information SNMP extensible-agent (bcmif.dll) is
designed for Windows 2000 Server, Windows Server 2003, and Windows Server 2008 SNMP service. It is required that
Windows 2000 Server SNMP service is installed before installing the extensible-agent.
The extensible-agent allows the SNMP manager software to actively monitor the configurations of the Broadcom NetXtreme
II adapter. It is intended to supplement the information already provided by the standard SNMP Management Network
Interface information.
The extensible-agent provides in-depth information about a Broadcom NetXtreme II adapter such as:
• MAC address
• Bound IP address
• IP subnet mask
• Physical link status
• Adapter state
• Line speed
• Duplex mode
• Memory range
• Interrupt setting
• Bus number
• Device number
• Function number
To monitor this information, a SNMP manager needs to load the Broadcom Extended information MIB file to allow monitoring
of the information described above. This file, bcmif.mib, is included on the installation CD.
The monitored workstation requires the installation of the Broadcom Extended Information SNMP extensible-agent,
bcmif.dll, and requires the Microsoft Windows 2000 Server, Windows Server 2003, and Windows Server 2008 SNMP service
to be installed and loaded.