Cisco Systems ASA 5580 Webcam User Manual


 
7-14
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 7 Configuring Access Rules
Feature History for Access Rules
Feature History for Access Rules
Table 7-2 lists each feature change and the platform release in which it was implemented. ASDM is
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 7-2 Feature History for Access Rules
Feature Name
Platform
Releases Feature Information
Interface access rules 7.0(1) Controlling network access through the ASA using ACLs.
We introduced the following screen: Configuration >
Firewall > Access Rules.
Global access rules 8.3(1) Global access rules were introduced.
We modified the following screen: Configuration > Firewall
> Access Rules.
Support for Identity Firewall 8.4(2) You can now use identity firewall users and groups for the
source and destination. You can use an identity firewall
ACL with access rules, AAA rules, and for VPN
authentication.
EtherType ACL support for IS-IS traffic 8.4(5), 9.1(2) In transparent firewall mode, the ASA can now pass IS-IS
traffic using an EtherType ACL.
We modified the following screen: Configuration > Device
Management > Management Access > EtherType Rules.
Support for TrustSec 9.0(1) You can now use TrustSec security groups for the source
and destination. You can use an identity firewall ACL with
access rules.
Unified ACL for IPv4 and IPv6 9.0(1) ACLs now support IPv4 and IPv6 addresses. You can even
specify a mix of IPv4 and IPv6 addresses for the source and
destination. The any keyword was changed to represent
IPv4 and IPv6 traffic. The any4 and any6 keywords were
added to represent IPv4-only and IPv6-only traffic,
respectively. The IPv6-specific ACLs are deprecated.
Existing IPv6 ACLs are migrated to extended ACLs. See the
release notes for more information about migration.
We modified the following screens:
Configuration > Firewall > Access Rules
Configuration > Remote Access VPN > Network (Client)
Access > Group Policies > General > More Options