Cisco Systems ASA 5580 Webcam User Manual


 
12-13
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 12 Configuring Inspection for Voice and Video Protocols
MGCP Inspection
Note To avoid policy failure when upgrading from ASA version 7.1, all layer 7 and layer 3 policies must have
distinct names. For instance, a previously configured policy map with the same name as a previously
configured MGCP map must be changed before the upgrade.
MGCP messages are transmitted over UDP. A response is sent back to the source address (IP address
and UDP port number) of the command, but the response may not arrive from the same address as the
command was sent to. This can happen when multiple call agents are being used in a failover
configuration and the call agent that received the command has passed control to a backup call agent,
which then sends the response. Figure 12-1 illustrates how NAT can be used with MGCP.
Figure 12-1 Using NAT with MGCP
MGCP endpoints are physical or virtual sources and destinations for data. Media gateways contain
endpoints on which the call agent can create, modify and delete connections to establish and control
media sessions with other multimedia endpoints. Also, the call agent can instruct the endpoints to detect
certain events and generate signals. The endpoints automatically communicate changes in service state
to the call agent.
MGCP transactions are composed of a command and a mandatory response. There are eight types of
commands:
CreateConnection
ModifyConnection
DeleteConnection
NotificationRequest
Notify
AuditEndpoint
AuditConnection
119936
Cisco
CallManager
Gateway is told
to send its media
to 209.165.200.231
(public address
of the IP Phone)
M
IP
M
M
Cisco
PGW 2200
H.323
To PSTN
209.165.201.10
209.165.201.11
209.165.201.1
IP IP
Branch offices
RTP to 209.165.201.1
from 209.165.200.231
RTP to 10.0.0.76
from 209.165.200.231
10.0.0.76
209.165.200.231
MGCP
SCCP
GW
GW
209.165.200.231