Filter
Top Products
4-43
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 4 Configuring Network Object NAT (ASA 8.3 and Later)
Configuration Examples for Network Object NAT
c. Click Advanced to configure the real and mapped interfaces.
d. Click OK to return to the Edit Network Object dialog box.
Step 3 Configure an IPv4 PAT pool for translating the inside IPv6 network.
Under NAT, uncheck the Add Automatic Address Translation Rules check box.
Step 4 Configure PAT for the inside IPv6 network.
a. Create a network object for the inside IPv6 network.
b. Define the IPv6 network address, and configure dynamic NAT using a PAT pool.