Filter
Top Products
4-6
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 4 Configuring Network Object NAT (ASA 8.3 and Later)
Configuring Network Object NAT
Step 4 Check the Add Automatic Translation Rules check box.
Step 5 From the Type drop-down list, choose Dynamic. Choose Dynamic even if you are configuring dynamic
PAT with a PAT pool.
Step 6 Configure either dynamic NAT, or dynamic PAT with a PAT pool:
• Dynamic NAT—To the right of the Translated Addr field, click the browse button and choose an
existing network object or create a new object from the Browse Translated Addr dialog box.
Note The object or group cannot contain a subnet. The group cannot contain both IPv4 and IPv6
addresses; it must contain one type only.
• Dynamic PAT using a PAT pool—Enable a PAT pool: