Filter
Top Products
14-12
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 14 Configuring Inspection for Management Application Protocols
RADIUS Accounting Inspection
Fields
• Name—Enter the name of the previously configured RADIUS accounting map.
• Description—Enter the description of the RADIUS accounting map, up to 100 characters in length.
• Host Parameters tab:
–
Host IP Address—Specify the IP address of the host that is sending the RADIUS messages.
–
Key: (optional)—Specify the key.
–
Add—Adds the host entry to the Host table.
–
Delete—Deletes the host entry from the Host table.
• Other Parameters tab:
–
Attribute Number—Specify the attribute number to validate when an Accounting Start is
received.
–
Add—Adds the entry to the Attribute table.
–
Delete—Deletes the entry from the Attribute table.
–
Send response to the originator of the RADIUS message—Sends a message back to the host
from which the RADIUS message was sent.
–
Enforce timeout—Enables the timeout for users.
• Users Timeout—Timeout for the users in the database (hh:mm:ss).
RADIUS Inspect Map
The RADIUS pane lets you view previously configured RADIUS application inspection maps. A
RADIUS map lets you change the default configuration values used for RADIUS application inspection.
You can use a RADIUS map to protect against an overbilling attack.
Fields
• Name—Enter the name of the inspect map, up to 40 characters in length.
• Description—Enter the description of the inspect map, up to 200 characters in length.
• RADIUS Inspect Maps—Table that lists the defined RADIUS inspect maps. The defined inspect
maps are also listed in the RADIUS area of the Inspect Maps tree.
• Add—Adds the new RADIUS inspect map to the defined list in the RADIUS Inspect Maps table and
to the RADIUS area of the Inspect Maps tree. To configure the new RADIUS map, select the
RADIUS entry in Inspect Maps tree.
• Delete—Deletes the application inspection map selected in the RADIUS Inspect Maps table and
from the RADIUS area of the Inspect Maps tree.
RADIUS Inspect Map Host
The RADIUS Inspect Map Host Parameters pane lets you configure the host parameter settings for the
inspect map.