Cisco Systems C90 Webcam User Manual


 
14
Cisco TelePresence System Codec C90 and Prole 65” Dual using C90 Administrator guide
D14635.05 Prole C90 and Codec C90 Administrator Guide TC4.1, February 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
The Call page
Making calls from the
web interface
Sometimes, e.g. when you are conguring
the system from a remote location, it is
convenient to be able to make calls from the
video system to ensure everything works as
expected.
Make a call
Input eld: Enter one or more characters
in the input eld, until the name you want
to call appears in the dynamic search list
or, enter the complete name or number.
Dial: Press Dial to initiate the call.
Disconnect all: Press Disconnect all to
end all calls.
Options: Click Options to change the bit
rate for this call. Select the Call rate in the
drop down list.
The call status page
The call status page appear when
you make a call. Please allow for
approximately 30 seconds after the call is
up before checking call details.
You will nd the following information on
the call status page:
• Remote number
• Status: Connected
• Direction: Incoming/Outgoing
• Protocol: H323/SIP
• Transmit and receive call rates
• Encryption
• Audio: Transmit and receive protocols
• Video: Transmit and receive protocols
and resolutions
• Presentation: Transmit and receive
protocols and resolutions
Contents
Contact us
Introduction
Advanced conguration
Password protection
Web interface
Appendices
Web interface