Cisco Systems C90 Webcam User Manual


 
6
Cisco TelePresence System Codec C90 and Prole 65” Dual using C90 Administrator guide
D14635.05 Prole C90 and Codec C90 Administrator Guide TC4.1, February 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
What’s new in this version
This section provides an overview of the new and changed API
commands and new features in the TC4.1.0 software version.
Software release notes
For a complete overview of the news and changes, we
recommend reading the Software Release Notes (TC4).
Go to:
http://www.cisco.com/en/US/products/ps11422/
tsd_products_support_series_home.html
Software download
For software download go to: http://www.cisco.com/cisco/
software/navigator.html
User documentation
Go to: http://www.cisco.com/go/telepresence/docs,
in the right pane, select:
• TelePresence Multipurpose Endpoints for the Prole Series.
• TelePresence Peripherals for the PrecisionHD cameras,
microphones, Touch unit, and remote controls.
• TelePresence Solutions Platform for the Codec C Series
and Quick Set C20.
New features and improvements
Cisco TelePresence Touch for C Series
The Cisco TelePresence Touch is a touch based user interface
that supports Cisco’s vision for a natural user experience.
You can make video calls, share content, and access some
advanced features - all with a simple tap of the nger.
The Cisco TelePresence Touch is now available for:
• Cisco TelePresence System Codec C Series (C40, C60, C90)
• Cisco TelePresence System Prole Series using Codec C Series
• Cisco TelePresence System Quick Set C20
NOTE: Cisco TelePresence Touch for C Series requires
software version TC4.1.0 or later.
Supported features:
• Calling
• Call control
• Conferencing
• Presenting
• Presentation source selection
• Layout handling
• Directory handling
• Favorites list
• Call history management
• Basic system conguration
• Basic presence control
• Camera control
• Limited to one camera
• Excluding camera presets
• Far end camera control on MultiSite (MultiSite is not
supported on Quick Set C20)
• Volume control
• Microphone mute control
• EMC resilience mode
• All in one “search and dial” mechanism
• Provisioning of system settings and phonebook is
supported. Provisioning of software upgrade is not
supported in this release
• Password protection of the Administrator Settings
The Administrator Settings menu on the Touch controller
can be password protected. This is done from a command
line interface with an API (Application Programmer Interface)
command. The password protection options are described in
the C Series administrator guides.
NOTE: When using the touch controller most of the system
conguration is done from the web interface. The web
interface is described in the C Series administrator guides.
The Cisco TelePresence Touch for C Series can be connected
to the codec over LAN or directly through network port 2.
Direct connection applies to Codec C40, C60 and C90.
Contents
Contact us
Introduction
Advanced conguration
Password protection
Web interface
Appendices
Introduction