Filter
Top Products
15
Cisco TelePresence System Codec C90 and Prole 65” Dual using C90 Administrator guide
D14635.05 Prole C90 and Codec C90 Administrator Guide TC4.1, February 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
The Snapshot page
Making a snapshot
When administering the video system from
a remote location, you can use the web
interface snapshot feature to check the view
of the main video input source.
This feature is disabled by default. The feature
can be enabled only when you have direct
access to the codec, i.e. from the on screen
menu or by using the command line interface
via the codec serial data port.
Using the on screen menu
From the Advanced conguration menu,
navigate to Video > AllowWebSnapshots and
select On to enable the snapshot feature.
Using the command line interface
Enter the following command to enable the
snapshot feature:
Video AllowWebSnapshots <Off/On>.
Make a snapshot
1. Press Get snapshot. The
snapshot will be displayed on
the web interface.
Contents
Contact us
Introduction
Advanced conguration
Password protection
Web interface
Appendices
Web interface