Filter
Top Products
1-78
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
000/1110/14 QoR:ported number—indicates that an
exchange detected that the called number was
ported out (see Annex C/Q.769.1)
ISUP Q.769.1 LN
001/0000/16 Normal call clearing—indicates that the call
is being cleared because one of the users
involved in the call has requested that the call
be cleared.
Under normal situations, the source of this
cause is not the network.
DSS 1, ISUP Q.931,
2.3/Q.764
U, RPN
001/0001/17 User busy— indicates that the called party is
unable to accept another call because the user
busy condition has been encountered. This
cause value may be generated by the called
user or by the network. In the case of user
determine user busy, it is noted that the user
equipment is compatible with the call.
DSS 1, ISUP Q.931,
Q.732,
Q.733.3
U, RPN,
RLN
Basic call and
call diversion
services
001/0010/18 No user responding—used when a called
party does not respond to a call establishment
message with either an alerting or connect
indication within the prescribed period of
time allocated.
DSS 1, ISUP Q.931,
Q.732
RLN Call diversion
services
001/0011/19 No answer from user (user alerted)—used
when the called party has been alerted but
does not respond with a connect indication
within a prescribed period of time.
Note This cause is not necessarily
generated by Q.931 procedures but
may be generated by internalnetwork
timers.
DSS 1, ISUP Q.931 RLN
2.1.4/Q.764,
2.9.8.3/
Q.764
RLN, TN,
INTL
Expiry of
waiting ANM
timer (T9)
Q.732 RLN Call diversion
services
001/0100/20 Subscriber absent—used when a mobile
station has logged off, radio contact is not
obtained with a mobile station or if a personal
telecommunication user is temporarily not
addressable at any user-network interface.
DSS 1, ISUP Mobile
application
001/0101/21 Call rejected—indicates that the equipment
sending this cause does not wish to accept this
call, although it could have accepted the call
because the equipment sending this cause is
neither busy nor incompatible. This cause
may also be generated by the network,
indicating that the call was cleared due to a
supplementary service constraint..
DSS 1, ISUP Q.931 U, RPN
Q.732 RLN Call diversion
services
Table 1-53 Cause Information Element/Parameter Definitions (continued)
Cause
Class/Value/No. Definition
Application
(Note 1)
Reference
(Note 2)
Location
(Note 3) Remarks