Filter
Top Products
1-118
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
Redirection Number (Tag: 4065)
Ingress SigPath ID (Tag: 4066)
Ingress Span ID (Tag: 4067)
Table 1-111 Ingress SigPath ID Description Form
Name: Redirection Number Tag: 4065 Source: MDL
Description/Purpose: This tag contains the digits of the new number when the PGW redirects a call.
Format: IA5 Length in Octets: 1-96
Data Value: Redirection number digits
Extended Data Value: No extended value.
General Information:
MGC Release: Release 9.7 and later.
Table 1-112 Ingress SigPath ID Description Form
Name: Ingress SigPath ID Tag: 4066 Source: MDL/Engine
Description/Purpose: The ingress SigPath ID is used to associate incoming bearer channels with signaling services, such
as a destination point code (DPC) in SS7.
Format: BE Length in Octets: 4
Data Value: 32 bits of binary value
Extended Data Value: No extended value.
General Information:
MGC Release: Release 7 and later.
Table 1-113 Ingress Span ID Description Form
Name: Ingress Span ID Tag: 4067 Source: MDL/Engine
Description/Purpose: The ingress Span ID is used for incoming PRI bearer channels. A span is a grouping of bearer
channels.
Format: BE Length in Octets: 4
Data Value: 32 bits of binary value
Extended Data Value: No extended value.
General Information:
MGC Release: Release 7 and later.