Filter
Top Products
1-81
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
001/1111/31 Normal, unspecified—used to report a normal
event only when no other cause in the normal
class applies.
DSS 1, ISUP Q.931 RLN
In Q.764, the
following
sections:
2.1.1, 2.1.2,
2.8.1, 2.8.2,
2.9.3, 2.9.6,
2.9.8.2,
2.9.8.3,
2.1.8, 2.2.4
TN, INTL,
RLN
Call failure
information
indicating the
failure of a call
due to the lapse
of a timeout or
a fault not
covered by
specific causes
(for example,
expiry of
timers Q.764
not covered by
specific causes,
release of
interconnected
circuit, etc.)
2.1.6/Q.764
2.9.7/Q.764
RLN, TN Expiry of
waiting INF
timer (T33)
Annex A/
Q.763
010/0010/34 No circuit/channel available—indicates that
there is no appropriate circuit/channel
presently available to handle the call.
DSS 1, ISUP Q.931,
Q.733.3
U, RPN,
RLN, LN,
TN
TN, INTL Circuit
congestion
encountered in
an exchange
010/0110/38 Network out of order—indicates that the
network is not functioning correctly and that
the condition is likely to last a relatively long
period of time (for example, immediately
re-attempting the call is not likely to be
successful).
DSS 1, ISUP Q.931 U. RPN
010/0111/39 Permanent frame mode connection out of
service—included in a STATUS message to
indicate that a permanently established frame
mode connection is out of service (for
example, due to equipment or section failure)
(see Annex A/Q.933).
DSS 1 Q.933
Table 1-53 Cause Information Element/Parameter Definitions (continued)
Cause
Class/Value/No. Definition
Application
(Note 1)
Reference
(Note 2)
Location
(Note 3) Remarks