Filter
Top Products
1-121
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
Egress Protocol ID (Tag: 4073)
Maintenance SigPath ID (Tag: 4074)
Table 1-119 Egress Protocol ID Description Form
Name: Egress Protocol ID Tag: 4073 Source: MDL/Engine
Description/Purpose: The egress Protocol ID is determined from MDL and is used in measurements and billing.
On Release 9.7(3), for the H.248 Protocol feature, new protocol type: “10=H.248” is added to the definition.
Format: BE Length in Octets: 1
Data Value:
0 = ISDN PRI
1 = C7
2 = DPNSS
3 = CAS
4 = ASN
5 = Unknown
6 = EISUP
7 = H.323
8 = SIP
9 = MGCP
Binary big-endian
Extended Data Value: No extended value.
General Information:
MGC Release: Release 7 and later.
Table 1-120 Maintenance SigPath ID Description Form
Name: Maintenance SigPath ID Tag: 4074 Source: MDL/Engine
Description/Purpose: The maintenance SigPath ID is used to associate maintenance bearer channels with signaling services,
such as a destination point code (DPC) in SS7.
Format: BE Length in Octets: 4
Data Value: 32 bits of binary value
Extended Data Value: No extended value.
General Information:
MGC Release: Release 7 and later.