Filter
Top Products
1-75
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
Reason Code (Tag: 3008/ITU)
Table 1-52 Reason Code Description Form
Name: Reason Code Tag: 3008 Source: MDL
Description/Purpose: Incorporates C7 release with cause values and any additional reasons that the basic call model
determines.
Format: based on ITU-T Q.850 Length in Octets: 2
Data Value:
Format:
876 5 4 3 2 1
1 Ext. Coding Standard Spare Location
2 Ext. Cause value
Note: This CDE does not include the Diagnostic and Recommendation octets defined in Q.850. The format of this CDR is
the same for both Q.763 and Q.931 signaling.
Extension:
0 Octet continues through the next octet (for example, octet 1 to 1a)
1 Last octet
Coding Standard
00 ITU-T standardized coding
01 ISO/IEC standard
10 National standard
11 Standard specific to identified location
Note: The coding standards other than ITU-T should only be used when the desired cause value cannot be represented with
the ITU-T standardized codeing.
Location:
0000 User (U)
0001 Private network serving the local user (LPN)
0010 Public network serving the local user (LN)
0011 Transit network (TN)
0100 Public network serving the remote user (RLN)
0101 Private network serving the remote user (RPN)
0111 International network (INTL)
1010 Network beyond interworking point (BI)
1100
to Reserved for National use
1111
All other values are spare.