Filter
Top Products
1-114
Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11
Chapter 1 Billing Interfaces
CDE Detail Description
Egress Packet Info (Tag: 4047) Restored
Directional Flag (Tag: 4048)
Table 1-102 Egress Packet Info Description Form
Name: Egress Packet Info Tag: 4047 Source: MDL
Description/Purpose: Contains the packets sent, packets received, packets lost, octets sent, octets received, jitter, and
latency information (reserved 1 and 2) from the egress gateway.
On Release 9.7(3), H.248 support is added. For an H.248 call, the subfield definitions are unchanged and the data is filled
with the statistics of Network Package (nt) and RTP Package (rtp) in H.248.
Format: BE Length in Octets: 36
Data Value:
SubfieldLengthPosition Value
Packets sent41MGCP->DLCX or DLCX ack,P:PS=
Packets received45MGCP->DLCX or DLCX ack,P:PR=
Packets lost49MGCP->DLCX or DLCX ack,P:PL=
Octets sent413MGCP->DLCX or DLCX ack,P:OS=
Octets received417MGCP->DLCX or DLCX ack,P:OR=
Jitter421MGCP->DLCX or DLCX ack,P:JI=
Latency425MGCP->DLCX or DLCX ack,P:LA=
Reserved 1429
Reserved 2433
Extended Data Value: No extended value.
General Information:
MGC Release: Release 7.0 to 7.3, and Release 9.4(1) and up.
Note: This tag was retired in Release 7.4. It is restored as of Release 9.4(1).
Table 1-103 Directional Flag Description Form
Name: Directional Flag Tag: 4048 Source: MDL/Engine
Description/Purpose: Contains information that describes the role of the Cisco MGC when EISUP is involved.
Format: BE Length in Octets: 1
Data Value:
0 = Intermediate Switch (E-ISUP to E-ISUP)
1 = Ingress Switch (^E-ISUP to E-ISUP)
2 = Egress Switch (E-ISUP to ^E-ISUP)
3 = Both (^E-ISUP to ^E-ISUP)
Extended Data Value: No extended value.
General Information:
MGC Release: Release 7.0 and later.